Using your Remote Control:
1. On your remote control Press the Blue DSTV button
2. Select Settalite settings > Select Additional Channel > Select network 2
3. Got o frequency and enter 12602
4. Go to symbol rate and enter 26657
5. Go to FEC using the right arrow > select 2/3
6. Then put polarisation on vertical
Scan this channel
After scanning is done Press the small OPT button Change from my channels to all channels.
Exit and press the right arrow . When the grid of the channel is showing scroll upwards until you see the radio channels, continue scrolling upwards until you see free to air channels and select Loveworldsat
Note: You May find two LoveworldSAT channels, one may be just audio and the other one plays perfectly well. If all these settings did not work try them on Network 1.